The Cable Matters USB-C Cable delivers up to 8K 30Hz / 4K 120Hz video from a laptop to a monitor. Connect a full-featured USB-C cable for a higher data transmission rate, 8K video, and power delivery. Up to 100W Power Delivery and 8K Video Support. Power and charge a laptop, tablet, or phone up to 100 watts with your USB-C car or wall charger. Let’s take a look at all the ways you can connect a Raspberry Pi to a TV, monitor, or compact display. 1. All Raspberry Pis Have HDMI. Unless you’re using your Raspberry Pi in headless mode (that is, without a display) you’ll need a monitor. One of the most important cables you can use with the Pi is a good quality HDMI cable. The HDMI (ARC) port is a little different. It allows you to use the port as either a normal input or an audio output. That means you can connect audio devices, like a soundbar, with only one HDMI cable, instead having to connect multiple ones. It’s very convenient and gives you more freedom with your monitor and device setup. Once the driver software is installed, shut down your computer. Plug the USB end of the adapter into the correct USB port on your laptop. Next, start up your computer and let it fully boot before moving on to the next step. With the driver software installed, your computer should detect the two monitors. So, for this: On your laptop, right-click on the desktop screen. Select Display Settings . Extend the Multiple displays tab. If your laptop has not automatically detected the monitors connected, click on Detect to do so manually. Once you see your laptop screen on your monitor, click Identify on the Display Settings windows. 01-14-2023 04:05 PM in. I don't think the A53 has MHL (mobile high-def link), meaning it can't be directly plugged in with a USB C cable. It might be possible to use a USB to HDMI adapter (or USB C to HDMI cable) to plug directly into the monitor. Other possibilities is screen sharing (Smart View) if both devices are on the same network You can connect the tablet to your monitor through the tablet’s video port using cables or adapters with either USB-C on one side and HDMI, VGA, or DVL on the other side. All you need to do is to connect the adapter or cable to your tablet and then plug the HDMI cable into your monitor. Notice that tablets are quickly replacing laptops and Plug the AC end of the dock power cord into a power source, then plug the other end into the power jack on the dock. If you want to use a wired network connection, connect a network cable to the Ethernet port. Connect your USB computer peripherals to the USB ports. Connect a video cable from your monitor to the Mini DisplayPort on your Surface Connect the USB C to HDMI adapter to the USB C port on your laptop that supports DisplayPort. Connect the other end of the USB-to-HDMI adapter to an HDMI cable. Finally, connect the other end of the HDMI cable to your display device. Once you have everything connected, turn on your laptop and plug in your monitor to a power source. Most monitors connect to your computer via specialized graphics ports, such as HDMI, DVI or DisplayPort. These monitors don't connect via USB, even though some monitors have USB ports for servicing or updating firmware. X57kC.